Food-Energy-Water Nexus in compliance with Sustainable Development Goals for integrating and managing the core environmental verticals for sustainable energy and circular economy.

Food, energy, and water resources are intricately interconnected, and nexus provides a holistic approach for addressing these complex links to minimize inefficiencies and waste. Nexus approach and circular economy are considered as effective solutions for sustainability. Quantification of these relations is the first step towards incorporating nexus modeling which helps sustainable production and consumption. For achieving the Sustainable Development Goals, understanding and effectively managing the FEW nexus becomes imperative. With an integral performance perspective, there is a need to address the interdependencies and trade-offs among food, energy, and water systems and challenges of economic, social and environmental sustainability. The aim of this study is to provide a comprehensive analysis of the FEW nexus, identify key opportunities and challenges, and propose integrated strategies for managing these core environmental verticals sustainably. The study addresses the accomplishment of these goals through nexus approaches and outlines the need for technological advancements for shared benefits among resources, contributing to conceptual development of nexus and circular economy. The results highlight the critical importance of adopting a nexus approach to advance sustainable development goals, enhance resource efficiency, and promote synergistic solutions across food, energy, and water systems.

Unveiling the microwave heating performance of biochar as microwave absorber for microwave-assisted pyrolysis technology.

Microwave (MW) heating has gained significant attention in food industries and biomass-to-biofuels through pyrolysis over conventional heating. However, constraints for promoting MW heating related to the use of different MW absorbers are still a major concern that needs to be investigated. The present study was conducted to explore the MW heating performance of biochar as a low-cost MW absorber for performing pyrolysis. Experiments were performed on biochar under different biochar dosing (25 g, 37.5 g, 50 g), MW power (400 W, 700 W, 1000 W), and particle sizes (6 mm, 8 mm, 10 mm). Results showed that MW power and biochar dosing significantly impacted average heating rate (AHR) from 17.5 to 65.4 °C/min at 400 W and 1000 W at 50 g. AHR first increased, and then no significant changes were obtained, from 37.5 to 50 g. AHR was examined by full factorial design, with 94.6% fitting actual data with predicted data. The model suggested that the particle size of biochar influenced less on AHR. Furthermore, microwave absorption efficiency and biochar weight loss were investigated, and microwave absorption efficiency decreased as MW power increased, which means 17.16% of microwave absorption efficiency was achieved at 400 W rather than 700 W and 1000 W. Biochar weight loss estimated by employing mass-balance analysis, 2-10.4% change in biochar weight loss was obtained owing to higher heating rates at higher powers and biochar dosing.

Semi-continuous anaerobic co-digestion of thermal and thermal-alkali processed organic fraction of municipal solid waste: Methane yield, energy analysis, anaerobic microbiome.

The semi-continuous anaerobic co-digestion (AcoD) of thermal and thermal-alkali pretreated organic fraction of municipal solid waste (OFMSW) and sewage sludge (SS) was studied under varying hydraulic retention times (HRT) and organic loading rates (OLR Three semi-continuous digesters were operated under control (non-pre-treated), thermally pretreated (125 °C), and thermal-alkali pretreated (125°C-3g/L NaOH) conditions at variable OLRs at 2.5, 4.0, 5.1, and 7.6 kgVS/m3.d and corresponding HRTs of 30, 20, 15, and 10 days. The 10 and 43% higher methane yield (0.445 m3/kgVS) and 11 and 57% higher VS removal (52%) was achieved for thermal-alkali pretreated digester at 5.1 kgVS/m3.d OLR over thermally pretreated (0.408 m3/kgVS, 45% VS removal) and control digesters (0.310 m3/kgVS, 33% VS removal), respectively. Thermal and thermal-alkali digesters failed on increasing the OLR to 7.6 kgVS/m3.d, whereas the control digester becomes upset at 5.1 kgVS/m3.d OLR. The metagenomic study revealed that Firmicutes, Bacteroidetes, Chloroflexi, Euryarchaeota, Proteobacteria, and Actinobacteria were the predominant bacterial population, whereas Methanosarcina and Methanothrix dominated the archaeal community. Energy balance analysis revealed that thermal alkali pretreatment showed the highest positive energy balance of 114.6 MJ/ton with an energy ratio of 1.25 compared with thermally pretreated (81.5 MJ/ton) and control samples (-46.9 MJ/ton). This work pave the way for scaleup of both thermal and thermal-alkali pre-treatment at 125 °C to realize the techno-economic and energy potential of the process.

Utilization of agricultural residues for energy and resource recovery towards a sustainable environment.

Fungal pre-treatment using Pleurotus ostreatus (PO) was carried out on individual and combinations of agro-waste wheat straw (WS), rice straw (RS), and pearl millet straw (PMS) with the addition of biochar (5%,7.5% and 10%) to reduce the pre-treatment duration. Further remaining substrate known as spent mushroom substrate (SMS) was used in anaerobic digestor (AD) for estimation enhanced biomethane yield. Equal ratios of RS + WS, WS + PMS, PMS + RS, and RS + PMS + WS and biochar addition were taken for enhancing pre-treatment, PO growth and AD process. The extent of pre-treatment was recorded with the maximum lignin removal of 40.4% for RS + PMS + WS as compared to untreated counterparts and 0.5%, 2.2%, and 3.3% times more lignin removal from individual PMS, RS, and WS respectively. Addition of biochar to the substrates reduced the total pre-treatment duration by days as compared to the non-biochar substrates. Biological efficiency (BE) used for the analysis of mushroom growth varied from 51-92%. Further, the average bio-methane yield was 187 ml/gVS for SMS of PMS + WS + RS with 10% biochar indicating an increment of 83.33% from untreated SMS of PMS + WS + RS. This, higher biomethane yield was 9.35%, 22.22% and 57.14% times higher than individual SMS of PMS, RS, and WS respectively. The current study shows that biochar not only enhances the bio-methane yield but also reduces the biological pre-treatment duration and removes the dependency on one lignocellulosic biomass for energy (bio-methane) and food (mushroom) production.

Treatment of clinical laboratory sewage using a decentralized treatment unit and risk reduction for its reuse in irrigation using hybrid disinfection.

The disinfection efficacy of standalone chlorine, UV and their combined approach (hybrid) was investigated for the coliform removal in BioKube 1 and 2 treated effluents collected from different environmental settings of clinical and domestic wastes. Chlorine and UV disinfection were applied to BioKube treated wastewater with doses from 0 to 4 mg L-1 and 0-166 mJ cm-2 respectively. Combined disinfection strategies were designed to reduce the dose of chlorine and UV and to exploit the synergistic effect of them. The culturable coliforms were enumerated in treated wastewater sample (control), immediately after (reduction), and 24 h post disinfections (regrowth) using culture media plating and colilert-18 media. Both the BioKube systems (1 and 2) were effective in achieving the strict norms of physicochemical parameters, but not following the coliform counts of treated effluent for reuse in irrigation. A hybrid strategy of chlorine followed by UV was found to be the most effective among various standalone and combination approaches for the removal of coliforms (>4 log ER or <1000 CFU/100 mL) from both the treated effluents. However, coliform present in treated effluent of BioKube 1 were resisting (regrowth) against all kind of applied disinfectants except chlorine followed by UV dose at or more than 0.5 mg L-1 + 41 mJ cm-2. Limited reports are available on hybrid disinfection approaches with decentralized packaged sewage treatment units and this study would help to adopt as an effective tertiary treatment strategy for reuse of treated sewage for irrigation while ensuring public health safety.

Does carbon cloth really improve thermophilic anaerobic digestion performance on a larger scale? focusing on statistical analysis and microbial community dynamics.

Currently, the phenomenon of direct interspecies electron transfer (DIET) is of great interest in the technology of anaerobic digestion (AD) due to potential performance benefits. However, the conditions for the occurrence of DIET and its limits on improving AD under conditions close to real have not been studied enough. This research is concentrated on the effect of conductive carbon cloth (R3), in comparison with a dielectric fiberglass cloth (R2) and control (R1), on the AD performance in large (90 L) thermophilic reactors, fed with a mixture of simulated organic fraction of municipal solid waste and sewage sludge. While organic loading rate (OLR) was gradually increased from 2.4 to 8.66 kg VS/(m3 day), a statistically significant (p < 0.05) difference in biogas production was observed between R1 and both R2 and R3. However, at a maximum OLR of 12.12 kg VS/(m3 day) in R3, an increase in biogas production (p < 0.05) was observed both compared to R1 (by 8.97%) and R2 (by 4.24%). The content of volatile fatty acids in R3 as a whole was the lowest, especially at the maximum OLR. Biofilm on carbon cloth was rich in syntrophic microorganisms of the genera Tepidanaerobacter, as well as Defluviitoga, capable of DIET in mixed cultures with Methanothrix, which was the most abundant methanogen in biofilm. Suspended Bifidobacterium, Fervidobacterium and Anaerobaculum were negatively affected, while Defluviitoga, Methanothermobacter and Methanosarcina, on the contrary, were positively affected by the increase in OLR and showed, respectively, a negative and positive correlation (p < 0.05) with the main AD performance parameters.

Insights into sustainable resource and energy recovery from leachate towards emission mitigation for environmental management: A critical approach.

The exponential generation of municipal solid waste (MSW) and landfill disposal without any treatment has increased the continuous generation of landfill leachate. Improper MSW and leachate management are contributing to environmental degradation and water and soil pollution, which must be treated. Numerous works have been conducted on leachate treatments for energy and resource recovery. This review presents a comprehensive study of leachate management in which different treatment methods are discussed to analyze the suitability of processes that can be employed to treat leachate efficiently. Further, the characteristics of leachate are examined as properties of leachate may be varied depending upon the region. Still, several challenges related to leachate management and its treatments are discussed in this study. An integrated system could be a better option for treating leachate because it contains large amounts of organic and inorganic compounds. Proper leachate management would help to recover energy and value-added products (metals).

Biochemical hydrogen potential assay for predicting the patterns of the kinetics of semi-continuous dark fermentation.

The performance and kinetics response of thermophilic semi-continuous dark fermentation (DF) of simulated complex carbohydrate-rich waste was investigated at various hydraulic retention times (HRT) (2, 2.5, and 3 d) and compared with data obtained from biochemical hydrogen potential assay (BHP). A culture of Thermoanaerobacterium thermosaccharolyticum was used as the inoculum and dominated both in BHP and semi-continuous reactor. Both the modified Gompertz and first-order models described the DF kinetics well (R2 = 0.97-1.00). HRT of 2.5 d was found to be optimal in terms of maximum hydrogen production rate and hydrogen potential, which were 3.97 and 1.26 times higher, respectively, than in BHP. The hydrolysis constant was highest at HRT of 3 d and was closest to the value obtained in the BHP. Overall, BHP has been shown to be a useful tool for predicting H2 potential and the hydrolysis constant, while the maximum H2 production rate is greatly underestimated.

Enhanced production of acetic acid through bioprocess optimization employing response surface methodology and artificial neural network.

In this study, acetic acid bacteria (AAB) are isolated from fruit waste and cow dung on the basis of acetic acid production potential. The AAB were identified based on halo-zones produced in the Glucose-Yeast extract-Calcium carbonate (GYC media) agar plates. In the current study, maximum acetic acid yield is reported to be 4.88 g/100 ml from the bacterial strain isolated from apple waste. With the help of RSM (Response surface methodology) tool, glucose and ethanol concentration and incubation period, as independent variable showed the significant effect of glucose concentration and incubation period and their interaction on the AA yield. A hypothetical model of artificial neural network (ANN) was also used to compare the predicted value from RSM. Acetic acid production through the biological route can be the sustainable and clean approach to utilizing food waste in circular economy approach.

Comparative effect of conductive and dielectric materials on methanogenesis from highly concentrated volatile fatty acids.

Various conductive materials and their dielectric counterparts were used to get deeper insights into contribution of direct interspecies electron transfer (DIET) in improving methanogenesis from highly concentrated volatile fatty acids (12.5 g/L). Potential CH4 yield, maximum CH4 production rate and lag phase were significantly (up to 1.4, 3.9 and 2.0 times, respectively) improved with addition of stainless-steel mesh (SM) and carbon felt (CF) compared to both control and dielectric counterparts (p < 0.05). kapp increased by 82% for SM and 63% for CF compared to control (p < 0.05). Short thick pili-like structures up to 150 nm in width were formed only in CF and SM biofilms, however, were more abundant for SM. Ureibacillus and Limnochordia specific for SM biofilms, and Coprothermobacter and Ca. Caldatribacterium for CF biofilms, were considered electrogenic. Promotion of DIET by conductive materials is governed by many factors, including specificity of electrogenic groups to material surface.

Multifaceted production strategies and applications of glucosamine: a comprehensive review.

Glucosamine (GlcN) and its derivatives are in high demand and used in various applications such as food, a precursor for the biochemical synthesis of fuels and chemicals, drug delivery, cosmetics, and supplements. The vast number of applications attributed to GlcN has raised its demand, and there is a growing emphasis on developing production methods that are sustainable and economical. Several: physical, chemical, enzymatic, microbial fermentation, recombinant processing methods, and their combinations have been reported to produce GlcN from chitin and chitosan available from different sources, such as animals, plants, and fungi. In addition, genetic manipulation of certain organisms has significantly improved the quality and yield of GlcN compared to conventional processing methods. This review will summarize the chitin and chitosan-degrading enzymes found in various organisms and the expression systems that are widely used to produce GlcN. Furthermore, new developments and methods, including genetic and metabolic engineering of Escherichia coli and Bacillus subtilis to produce high titers of GlcN and GlcNAc will be reviewed. Moreover, other sources of glucosamine production viz. starch and inorganic ammonia will also be discussed. Finally, the conversion of GlcN to fuels and chemicals using catalytic and biochemical conversion will be discussed.

Effect of physical and thermal pretreatment of lignocellulosic biomass on biohydrogen production by thermochemical route: A critical review.

Energy demands and immense environmental degradation have extorted for production of low-carbon and carbon-neutral fuels. Abundantly available lignocellulosic biomass is second-generation feedstock which has potential to produce biofuels. Among all biofuels, biohydrogen is carbon neutral and sustainable biofuel which can be produced by thermochemical conversion routes mainly gasification. However, there are still numerous unsolved challenges related to physicochemical properties of lignocellulosic biomass. To tackle these issues, physical, chemical and thermal pretreatment methods can be employed to improve these properties and further strengthen usability of biomass for biohydrogen production. Pelletization, torrefaction and hydrothermal carbonization pretreatment have shown significant results for treating biomass and biohydrogen enhancement. This study reviews physical and thermal pretreatment and its effect on biohydrogen yield. Framework of techno-economic analysis of processes is provided for examining feasibility of required pretreatments. This sustainable approach will help to reduce emissions and promote concept of bioenergy with carbon capture and storage.

Microbial fuel cells for waste nutrients minimization: Recent process technologies and inputs of electrochemical active microbial system.

Still, in the current period, non-renewable energy sources have contributed to fulfill the current energy requirement and it causes the deficit of available stocks with emission of pollutant byproducts components. In recent years, efforts were made to harness the sustainable/ renewable fuels from renewable sources/ waste, complex organic matters including biomass at global level. Researchers have put attention on harnessing energy from wastewater and MFCs systems. This MFC approach utilizes the wastewater as feed/ carbon sources to generate bioenergy such as bio- hydrogen and electricity in a sustainable and efficient way via completing the wastewater treatment. This approach consists of anode and cathode electrodes with proton exchange membrane (PEM). Microbial fuel cells are utilized with other effective approaches (anaerobic digestion/ fermentation, local demand-based-MFC approach) that are applied to utilize biowastes for microbial cell growth and electron emission. This review discusses the recent and technologically advanced approach such as microbial fuel cells (MFCs). MFCs can apply to fulfill the increasing trends of global energy demand, found with more utilization in home appliances in urban areas, industrial tasks and transportation sectors. Last few decades, there have been recent modifications in MFCs configurations and design that have improved performance of MFCs. Recent design and configuration of MFCs have shown the removal of maximum chemical oxygen demand (up to 94-97%) with generation maximum current output (up to 5.23 mA) from wastewater. This review presents a comprehensive collection of recent information about technologies and design of MFCs with implementation of microbial electrogene with development of wastewater treatment having sustainable fuel/ energy generation at an effective level.

Effect of Comorbidities on Outcomes of Infrapopliteal Angioplasty in Patients with Chronic Limb-Threatening Ischemia.

OBJECTIVE: This subgroup analysis aimed to evaluate the effect of comorbidities on infrapopliteal angioplasty outcomes in patients with chronic limb-threatening ischemia (CLTI). METHODS: This was an observational study evaluating eligible CLTI patients aged >18 years who underwent infrapopliteal angioplasty between April 2014 and May 2017 at a tertiary care center. Subgroup analyses were based on (1) baseline glycated hemoglobin (HbA1c ≤6.5% vs >6.5%), (2) presence/absence of chronic kidney disease (CKD), and (3) control of lipid parameters. RESULTS: A total of 231 patients with 332 infrapopliteal vessels were treated. While diabetes was prevalent in all participants, hypertension, coronary artery disease, and CKD were reported in 76.6%, 46.3%, and 25.5% of patients at baseline, respectively. The overall technical success rate was 84.4%, and the patency rate at 6 months was 82.04%. Patency at 6 months, wound healing, in-line flow, and complete plantar arch formation were numerically higher in patients with HbA1c ≤6.5% versus >6.5%, but all comparisons were nonsignificant. According to multivariable analysis, the odds of wounds not healing was 2.38 times higher (odds ratio [OR] = 2.4, 95% confidence interval [CI]: 1.2 to 4.5) and developing plantar arch was 5.88 times higher (OR = 5.9, 95% CI: 1.3 to 25) among patients with CKD compared with patients without CKD. CONCLUSIONS: The 6-month outcomes of infrapopliteal angioplasty may be better in patients with controlled versus uncontrolled glycemic levels. Control of lipid parameters may not have a significant influence on outcomes, especially in patients on statin therapy. The short-term outcomes may be similar in patients with and without CKD.

Antibiotic resistance genes and bacterial diversity: A comparative molecular study of treated sewage from different origins and their impact on irrigated soils.

Present study aims to investigate how is soil affected following irrigation with treated effluents of different origins by analysing the bacterial diversity, metabolic diversity and antibiotic resistance genes (ARGs). Comparative analysis with previously reported ARGs in effluents was performed to understand the mobility of ARGs from treated wastewater to the irrigated soil with respect to the control soil regimen. Acinetobacter, Burkholderia and Pseudomonas were observed as the most abundant genera in all the samples. The metabolic gene abundance of all the samples suggests a prominent contribution to natural mineral recycling. Most abundant ARGs observed encode resistance for clindamycin, kanamycin A, macrolides, paromomycin, spectinomycin and tetracycline. Treated effluent reuse did not appear to enhance the ARG levels in soils in most cases except for institutional treatment site (M), where the ARGs for aminoglycosides, ß-lactams and sulfonamides were found to be abundantly present in both treated effluent and the irrigated soil. This study finds the importance of wastewater treatment from different origins and the impact of treated wastewater reuse in irrigation. This study also emphasises on the better understanding of ARGs mobility from water to soil.

Integrated system of anaerobic digestion and pyrolysis for valorization of agricultural and food waste towards circular bioeconomy: Review.

Agricultural and food waste have become major issue affecting the environment and climate owing to growing population. However, such wastes have potential to produce renewable fuels which will help to meet energy demands. Numerous valorization pathways like anaerobic digestion, pyrolysis, composting and landfilling have been employed for treating such wastes. However, it requires integrated system that could utilize waste and promote circular bioeconomy. This review explores integration of anaerobic digestion and pyrolysis for treating agricultural and food waste. Proposed system examines the production of biochar and pyro-oil by pyrolysis of digestate. The use of this biochar for stabilizing anaerobic digestion process, biogas purification and soil amendment will promote the circular bioeconomy. Kinetic models and framework of techno-economic analysis of system were discussed and knowledge gaps have been identified for future research. This system will provide sustainable approach and offer carbon capture and storage in form of biochar in soil.

Sustainable utilization of pineapple wastes for production of bioenergy, biochemicals and value-added products: A review.

Agricultural residues play a pivotal role in meeting the growing energy and bulk chemicals demand and food security of society. There is global concern about the utilization of fossil-based fuels and chemicals which create serious environmental problems. Biobased sustainable fuels can afford energy and fuels for future generations. Agro-industrial waste materials can act as the alternative way for generating bioenergy and biochemicals strengthening low carbon economy. Processing of pineapple generates about 60% of the weight of the original pineapple fruit in the form of peel, core, crown end, and pomace that can be converted into bioenergy sources like bioethanol, biobutanol, biohydrogen, and biomethane along with animal feed and vermicompost as described in this paper. This paper also explains about bioconversion process towards the production of various value-added products such as phenolic anti-oxidants, bromelain enzyme, phenolic flavour compounds, organic acids, and animal feed towards bioeconomy.

Reprint of Organic waste conversion through anaerobic digestion: A critical insight into the metabolic pathways and microbial interactions.

Anaerobic digestion is a promising method for energy recovery through conversion of organic waste to biogas and other industrial valuables. However, to tap the full potential of anaerobic digestion, deciphering the microbial metabolic pathway activities and their underlying bioenergetics is required. In addition, the behavior of organisms in consortia along with the analytical abilities to kinetically measure their metabolic interactions will allow rational optimization of the process. This review aims to explore the metabolic bottlenecks of the microbial communities adopting latest advances of profiling and 13C tracer-based analysis using state of the art analytical platforms (GC, GC-MS, LC-MS, NMR). The review summarizes the phases of anaerobic digestion, the role of microbial communities, key process parameters of significance, syntrophic microbial interactions and the bottlenecks that are critical for optimal bioenergetics and enhanced production of valuables. Considerations into the designing of efficient synthetic microbial communities as well as the latest advances in capturing their metabolic cross talk will be highlighted. The review further explores how the presence of additives and inhibiting factors affect the metabolic pathways. The critical insight into the reaction mechanism covered in this review may be helpful to optimize and upgrade the anaerobic digestion system.

Organic waste conversion through anaerobic digestion: A critical insight into the metabolic pathways and microbial interactions.

Anaerobic digestion is a promising method for energy recovery through conversion of organic waste to biogas and other industrial valuables. However, to tap the full potential of anaerobic digestion, deciphering the microbial metabolic pathway activities and their underlying bioenergetics is required. In addition, the behavior of organisms in consortia along with the analytical abilities to kinetically measure their metabolic interactions will allow rational optimization of the process. This review aims to explore the metabolic bottlenecks of the microbial communities adopting latest advances of profiling and 13C tracer-based analysis using state of the art analytical platforms (GC, GC-MS, LC-MS, NMR). The review summarizes the phases of anaerobic digestion, the role of microbial communities, key process parameters of significance, syntrophic microbial interactions and the bottlenecks that are critical for optimal bioenergetics and enhanced production of valuables. Considerations into the designing of efficient synthetic microbial communities as well as the latest advances in capturing their metabolic cross talk will be highlighted. The review further explores how the presence of additives and inhibiting factors affect the metabolic pathways. The critical insight into the reaction mechanism covered in this review may be helpful to optimize and upgrade the anaerobic digestion system.

Bioengineered bioreactors: a review on enhancing biomethane and biohydrogen production by CFD modeling.

Computational fluid dynamics (CFD) is numerical strategy developed for simulating the behavior of liquid and gas flow. CFD may be applied starting from aerospace, engine design, vehicle aerodynamics, power plants and chemical industries for analyzing and solving relevant system design and process issues. Biogas produced during anaerobic digestion (AD) is sustainable and renewable alternative to fossil fuels. AD may improve the controlled production of biogas and offers significant environmental benefits. This review focuses on research outcomes relevant for enhanced biogas production by exploring the possible applications of CFD in AD technology. CFD-related research performed in AD conditions in order to improve mixing performance, reduce power consumption, and understand the effects of total solid (TS) concentrations on flow behavior have been discussed. In addition, the use of AD for bio-hydrogen production, wastewater treatment, and sludge treatment are looked in. This review also identifies novel areas for AD technology advancement where there is potential for economic improvement in renewable energy production. Finally, future research needs have been identified, focusing on the opportunities to integrate conceptual and mathematical models for advancing CFD simulations for bioenergy.